Scenes

Status Cycle

Status badge animation: a pill whose label cycles through states. A centred line whose status pill cycles: the label rolls up behind a hard clip while the pill's width springs past its target and back, and the line re-centres around it.

Status Cycle preview, rendered with Remotion.

Source

components/kuchi/status-cycle.tsx
"use client";
import { loadFont as loadInter } from "@remotion/google-fonts/Inter";
import { useEffect, useMemo, useRef, useState } from "react";
import {
AbsoluteFill,
continueRender,
delayRender,
Easing,
getRemotionEnvironment,
interpolate,
spring,
useCurrentFrame,
useVideoConfig,
} from "remotion";
import {
Item,
mixOklch,
resolveFont,
type KuchiTheme,
useKuchiTheme,
} from "@/lib/kuchi-ui";
const { fontFamily: SANS } = loadInter("normal", {
weights: ["400"],
subsets: ["latin"],
});
const CLAMP = {
extrapolateLeft: "clamp",
extrapolateRight: "clamp",
} as const;
// ---------------------------------------------------------------------------
// Proportions
//
// Every constant below is a *fraction* of the composition, never a pixel, so
// the scene holds its shape at 720p, 1080p or a vertical crop. They were
// measured off a reference recording at 802x450 by sub-pixel edge integration
// and divided through; the comment on each names what was measured.
// ---------------------------------------------------------------------------
/**
* Pill height as a multiple of the act-1 type size. Measured 44.21px against an
* implied 39.2px em, both at 450.
*
* Keyed to the type rather than to the frame so that when a long status forces
* the line to shrink, the pill shrinks with it instead of turning into a slab
* with a small word floating in it.
*/
const PILL_H = 1.128;
/** Pill centre, as a fraction of frame height. The lockup rides 1.6% low. */
const PILL_CY = 0.5164;
/**
* Corner radius as a fraction of the pill's own height.
*
* Not a stadium. Fitting a circle to the sub-pixel left edge over the pill's
* top 12 rows gives R/h = 0.222–0.235 at rms 0.07–0.17px; R = h/2 fits the same
* rows at rms 6.9–7.7px, two orders of magnitude worse. A stadium here reads as
* a completely different object — it is the single easiest detail to get wrong.
*/
const PILL_R = 0.229;
/** Pill padding either side of the label, as a fraction of pill height. */
const PILL_PAD = 0.19;
/** Prefix-to-pill gap, as a fraction of pill height. Measured 6.5px of 44.2. */
const PILL_GAP = 0.147;
/** Act-1 type size, as a fraction of frame height. Cap 29px / 0.72em of 450. */
const ACT1_EM = 0.087;
/** Act-2 type size, as a fraction of frame height. Cap 72px / 0.72em of 450. */
const ACT2_EM = 0.222;
/** Chip padding, as a fraction of its own type size. */
const CHIP_PAD_X = 0.42;
const CHIP_PAD_Y = 0.165;
/** Chip corner radius and hairline, as fractions of chip height. */
const CHIP_R = 0.162;
const CHIP_BORDER = 0.017;
/** Chip margin from the frame edge, as a fraction of frame width. */
const CHIP_INSET = 0.04;
/** Share of the frame width the act-1 lockup may occupy before it is scaled. */
const ACT1_FIT = 0.92;
/** Gap between stacked chips, as a fraction of frame height. */
const CHIP_GAP = 0.057;
/**
* The width morph is a **cubic-bezier, not a spring** — the `y2 > 1` control
* value is the overshoot.
*
* This is not a stylistic preference. Fitting Remotion's `spring()` over a full
* (damping, stiffness, rest) grid lands at rms 19.6px on a 207px travel, and the
* failure is structural: a spring released from rest is at pi^2/242 = 4.1% of
* travel one frame into an eleven-frame rise, and the reference is at 0.65%. No
* triple is six times flatter at the start and still peaks that early. Fitted
* per morph the reference gives (0.6,0,0.3,1.8) and (0.7,0.4,0.3,1.3); this is
* their average, at rms 1.1–1.7% of travel.
*/
const WIDTH_EASE = Easing.bezier(0.65, 0.2, 0.3, 1.5);
/** Seconds the width morph runs. Measured 15 and 14 frames on a 24fps clock. */
const WIDTH_SECONDS = 0.6;
/**
* The label roll: a symmetric ease-in-out — deliberately gentler and longer than
* the reference.
*
* The reference rolls in 8 frames of 24fps on (0.75, 0, 0.25, 1) (measured
* progress 0.010, 0.053, 0.164, 0.499, 0.833, 0.946, 0.990, 1.000). Rendered at
* 30fps that is 10 frames whose middle two each move a third of the travel —
* 32px a frame at 1080p — so the frame between them shows two half-cut labels and
* the swap reads as a flicker, not a roll. Reported as "flipping too fast".
*
* (0.45, 0, 0.55, 1) over 0.5s is 15 frames at 30: no step above 13px at 1080p,
* none below 0.8px (so no frozen frames in the tails, motion-quality rule 0).
* 0.6s was tried first and read as too slow; 0.5s is the step between the two.
* The label lands three frames before the width morph finishes its overshoot.
*/
const ROLL_EASE = Easing.bezier(0.45, 0, 0.55, 1);
/** Seconds the roll runs. See ROLL_EASE for why it is not the reference's 1/3. */
const ROLL_SECONDS = 0.5;
/** Roll travel, as a multiple of pill height. Measured 47.1px on a 46.2 pill. */
const ROLL_TRAVEL = 1.02;
/** Seconds the green-to-cream crossfade takes. Measured 18 frames of 60fps. */
const FADE_SECONDS = 0.3;
/** Seconds the lockup takes to leave upward. Measured 0.19s, exponential. */
const EXIT_SECONDS = 0.2;
/** Time constant of the act-2 scroll step, in seconds. Fitted 1-exp(-t/tau). */
const SCROLL_TAU = 0.06;
/**
* The per-letter intro scale.
*
* Measured peak is 1.45x the settled size, and a spring's overshoot is
* `exp(-pi*zeta/sqrt(1-zeta^2))` — so zeta = 0.25, which at stiffness 100 and
* mass 1 is damping 5. That is where these numbers come from; they are not a
* taste setting, and changing the damping moves the peak off the reference.
*/
const LETTER_SPRING = { damping: 5, stiffness: 100, mass: 1 } as const;
/**
* Pure scheduling and fitting math. Everything above the component is
* frame-deterministic and side-effect free so it can be unit tested.
*/
/** Accepts an array or the comma-separated string the customizer passes. */
export function toList(value?: string[] | string): string[] {
const list = typeof value === "string" ? value.split(",") : (value ?? []);
return list.map((s) => s.trim()).filter(Boolean);
}
/**
* Exponential ease-out, in frames.
*
* The reference's scroll step is not any fixed-duration curve: easeOutCubic
* predicts 0.977 at t=0.167s against a measured 0.918, and quint/expo are far
* too fast at the head. `1 - exp(-t/tau)` fits every sample of every step at
* tau = 0.060s, which is what a lerp-toward-target does, and it never overshoots
* — the reference's peak progress is exactly 1.000 at every step.
*/
export function settle(frames: number, tau: number): number {
if (frames <= 0) return 0;
return 1 - Math.exp(-frames / tau);
}
/**
* Which status is up at `frame`, and how many frames since it arrived.
*
* The index only ever advances, and `since` is relative to the swap that put
* the current label up — so a swap still settling when the next one starts
* hands over cleanly instead of compounding.
*/
export function statusAt({
frame,
introFrames,
statusHold,
count,
}: {
frame: number;
introFrames: number;
statusHold: number;
count: number;
}): { index: number; since: number } {
if (count <= 0) return { index: 0, since: 0 };
let index = 0;
for (let i = 1; i < count; i += 1) {
if (frame >= introFrames + (i - 1) * statusHold) index = i;
}
return { index, since: frame - (introFrames + (index - 1) * statusHold) };
}
/**
* How many chips have arrived at `frame`, and how far the step they triggered
* has run. Clamped to `count`, so the field stops stepping once the last chip
* is in rather than scrolling the whole column off the top.
*/
export function chipAt({
frame,
beat,
stagger,
count,
}: {
frame: number;
beat: number;
stagger: number;
count: number;
}): { arrived: number; since: number } {
if (count <= 0 || frame < beat) return { arrived: 0, since: 0 };
const arrived = Math.min(count, Math.floor((frame - beat) / stagger) + 1);
return { arrived, since: frame - beat - (arrived - 1) * stagger };
}
/**
* How much a measured line has to shrink to sit inside its budget.
*
* Only ever <= 1. Scaling *up* to fill the budget would make a two-word status
* larger than a five-word one, which is the opposite of a design system.
*/
export function fitScale(measured: number, budget: number): number {
if (!(measured > 0) || !(budget > 0)) return 1;
return Math.min(1, budget / measured);
}
export interface StatusCycleMotion {
/** Easing of the pill's width. `y2 > 1` on a bezier is what gives overshoot. */
widthEase: (t: number) => number;
/** Seconds the width morph runs. */
widthSeconds: number;
/** Easing of the label roll. */
rollEase: (t: number) => number;
/** Seconds the roll runs. */
rollSeconds: number;
/** Roll travel, as a multiple of pill height. */
rollTravel: number;
/** Seconds the field crossfade takes. */
fadeSeconds: number;
/** Seconds the lockup takes to leave upward. */
exitSeconds: number;
/** Time constant of an act-2 scroll step, in seconds. */
scrollTau: number;
/** Spring the intro's per-letter scale runs on. Damping sets the peak. */
letterSpring: { damping: number; stiffness: number; mass: number };
/** Frames between one letter's entry and the next. */
letterStagger: number;
}
/**
* Measured defaults. Every one but the roll is fitted from frame data — see the
* constant it reads from — so overriding one is a deliberate departure, not a
* tweak. The roll departs from its reference on purpose; ROLL_EASE says why.
*/
export const STATUS_CYCLE_MOTION: StatusCycleMotion = {
widthEase: WIDTH_EASE,
widthSeconds: WIDTH_SECONDS,
rollEase: ROLL_EASE,
rollSeconds: ROLL_SECONDS,
rollTravel: ROLL_TRAVEL,
fadeSeconds: FADE_SECONDS,
exitSeconds: EXIT_SECONDS,
scrollTau: SCROLL_TAU,
letterSpring: LETTER_SPRING,
letterStagger: 1,
};
export interface StatusCycleProps {
/** The line that does not change, to the left of the pill. */
prefix?: string;
/** Pill labels, in order. Also accepts a comma-separated string. */
statuses?: string[] | string;
/** Act-2 chip labels, in order. Also accepts a comma-separated string. */
chips?: string[] | string;
/** Act-1 field. Defaults to the design system's `primary`. */
fieldColor?: string;
/** Act-2 field. Defaults to the design system's `background`. */
pageColor?: string;
/** Pill fill. Defaults to `foreground`. */
pillColor?: string;
/** Pill label. Defaults to a pale tint of the field. */
pillLabelColor?: string;
/** Prefix ink. Defaults to `foreground`. */
prefixColor?: string;
/**
* Chip fills, cycled in order. The reference runs a period-3 cycle — a card,
* a pale tint, a saturated one — and that is what the default builds from the
* theme. Also accepts a comma-separated string.
*/
chipFills?: string[] | string;
/** Chip ink. One colour on every chip, including the saturated one. */
chipTextColor?: string;
/** Chip hairline. Defaults to the design system's border, scaled for a
* surface this size (`mixOklch(border, foreground, 0.28)`). */
chipBorderColor?: string;
/** Act-1 type weight. */
fontWeight?: number;
/** Act-2 type weight. Measured 400 in the reference — the chips are bigger,
* not heavier, and bumping this is the usual way to make them look cheap. */
chipFontWeight?: number;
/**
* Pill corner radius in px. Defaults to 0.229 x pill height — which is very
* nearly shadcn's own `radius` token over a 40px control (10/40 = 0.25), so
* the default already sits in the design system rather than beside it. Pass
* `theme.radius` scaled to your own control size to match exactly.
*/
pillRadius?: number;
/** Chip corner radius in px. Defaults to 0.162 x chip height. */
chipRadius?: number;
/** Chip hairline width in px. Defaults to 0.017 x chip height. */
chipBorderWidth?: number;
/** Pill centre, as a fraction of frame height. The reference rides 1.6% low. */
pillCenterY?: number;
/** Curve and timing overrides. Merged over {@link STATUS_CYCLE_MOTION}. */
motion?: Partial<StatusCycleMotion>;
/** Act-1 type size in px. Defaults to 8.7% of the composition height. */
fontSize?: number;
/** Act-2 type size in px. Defaults to 22.2% of the composition height. */
chipFontSize?: number;
/** Font stack. Defaults to Inter, loaded through `@remotion/google-fonts`. */
fontFamily?: string;
/**
* Frames from one status swap to the next. Keep it above the roll (0.5s, 15
* frames at 30fps) plus time to read the label: at or below the roll, the pill
* never rests and every label is read mid-flight.
*/
statusHold?: number;
/** Frames the intro cascade is given before the first swap. */
introFrames?: number;
/** Frames from one chip's arrival to the next. */
chipStagger?: number;
/** Frame the scene starts on. */
startAt?: number;
/** Playback rate. */
speed?: number;
/** Design-system token overrides. */
theme?: Partial<KuchiTheme>;
mode?: "light" | "dark";
}
interface Metrics {
/** Left offset and width of every prefix glyph, in layout px. */
letters: { left: number; width: number }[];
prefixWidth: number;
/** Distance from the prefix box's top to its baseline. */
baseline: number;
statusWidths: number[];
chipWidths: number[];
}
export function StatusCycle({
prefix = "kuchi is",
statuses = ["animating", "transitioning", "rendering a scene", "installed"],
chips = [
"text-reveal",
"phone-frame",
"answer-stream",
"word-flip",
"orbit-gallery",
],
fieldColor,
pageColor,
pillColor,
pillLabelColor,
prefixColor,
chipFills,
chipTextColor,
chipBorderColor,
fontWeight = 400,
chipFontWeight = 400,
pillRadius,
chipRadius,
chipBorderWidth,
pillCenterY = PILL_CY,
motion,
fontSize,
chipFontSize,
fontFamily,
statusHold = 30,
introFrames = 24,
chipStagger = 8,
startAt = 0,
speed = 1,
theme,
mode,
}: StatusCycleProps) {
const frame = useCurrentFrame() * speed - startAt;
const { fps, width, height } = useVideoConfig();
const t = useKuchiTheme(theme, mode);
const face = resolveFont(fontFamily ?? t.fontFamily) ?? SANS;
// Memoised because they are `useEffect` dependencies: rebuilt every render,
// the measuring effect would re-run forever.
const labels = useMemo(() => toList(statuses), [statuses]);
const chipLabels = useMemo(() => toList(chips), [chips]);
const glyphs = useMemo(() => [...prefix], [prefix]);
const field = fieldColor ?? t.primary;
const page = pageColor ?? t.background;
const pillFill = pillColor ?? t.foreground;
const prefixInk = prefixColor ?? t.foreground;
// A pale tint of the field: the reference's label is its own brand colour
// lightened, and this reproduces that relationship in whatever palette the
// component lands in.
//
// Mixed toward `card`, NOT `background`, and that is load-bearing. `mixOklch`
// interpolates hue the short way round, and `background` (#faf9f6) is a *warm*
// off-white with a real hue near 90 degrees — so a mix from a 264-degree blue
// sweeps 174 degrees through green and lands on rgb(164,213,180). `card` is
// achromatic, its hue is undefined, and the blue's hue is carried through
// unchanged: rgb(178,205,247), the pale blue anyone would expect.
const labelInk = pillLabelColor ?? mixOklch(field, t.card, 0.62);
const chipInk = chipTextColor ?? t.foreground;
// One hairline on every chip, from the system's own recipe for scaling a
// border token up to a surface this size (design-system rule 3b) — not a
// per-fill blend, because the reference likewise inks every chip the same.
const chipEdge = chipBorderColor ?? mixOklch(t.border, t.foreground, 0.28);
const m = { ...STATUS_CYCLE_MOTION, ...motion };
const fills = toList(chipFills);
const fillCycle =
fills.length > 0 ? fills : [t.card, mixOklch(t.card, field, 0.14), field];
const nominalEm = fontSize ?? ACT1_EM * height;
const nominalChipEm = chipFontSize ?? ACT2_EM * height;
// -------------------------------------------------------------------------
// Measure. `offsetWidth`/`offsetLeft` are layout px, untouched by the
// transforms this scene is about to apply, which is exactly what makes them
// the right tool. Measured in a hidden, untransformed copy so frame 0 can
// never be captured against the wrong geometry.
// -------------------------------------------------------------------------
const [metrics, setMetrics] = useState<Metrics | null>(null);
const [handle] = useState(() => delayRender("status-cycle: measuring"));
const letterRefs = useRef<(HTMLSpanElement | null)[]>([]);
const prefixRef = useRef<HTMLSpanElement | null>(null);
const baselineRef = useRef<HTMLSpanElement | null>(null);
const statusRefs = useRef<(HTMLSpanElement | null)[]>([]);
const chipRefs = useRef<(HTMLSpanElement | null)[]>([]);
useEffect(() => {
if (metrics) {
continueRender(handle);
return;
}
const prefixWidth = prefixRef.current?.offsetWidth ?? 0;
if (prefixWidth <= 0) return;
setMetrics({
letters: glyphs.map((_, i) => ({
left: letterRefs.current[i]?.offsetLeft ?? 0,
width: letterRefs.current[i]?.offsetWidth ?? 0,
})),
prefixWidth,
baseline: baselineRef.current?.offsetTop ?? 0,
statusWidths: labels.map(
(_, i) => statusRefs.current[i]?.offsetWidth ?? 0,
),
chipWidths: chipLabels.map(
(_, i) => chipRefs.current[i]?.offsetWidth ?? 0,
),
});
}, [metrics, handle, glyphs, labels, chipLabels]);
// -------------------------------------------------------------------------
// Timeline
// -------------------------------------------------------------------------
const swapAt = (i: number) => introFrames + (i - 1) * statusHold;
const act1End = swapAt(labels.length) + statusHold;
const fadeStart = act1End;
const fadeFrames = m.fadeSeconds * fps;
// The three events are one beat, not three. In the reference the lockup leaves
// and the first chip arrives on the same frame, and that frame is the exact
// midpoint of the crossfade — colour starts moving, the swap happens under it,
// colour finishes. Splitting them reads as three separate cuts.
const beat = fadeStart + fadeFrames / 2;
// Two opaque layers with an opacity ramp, not `mixOklch` between the two.
// The reference's own crossfade does look like an OKLCH mix — its R channel
// runs 2-5 points behind G and B, which an sRGB lerp cannot do — but its two
// colours are a green and a cream, 30 degrees of hue apart. Ours are whatever
// the theme says, and `primary` to `background` is 174 degrees, which OKLCH
// walks the short way *through green*. A layered crossfade is what the word
// means and it cannot swing.
const fadeP = interpolate(
frame,
[fadeStart, fadeStart + fadeFrames],
[0, 1],
CLAMP,
);
// -------------------------------------------------------------------------
// Fit
//
// A size measured off one sentence is a size that clips the next one. Both
// acts are measured at their nominal type size and then scaled down — never
// up — by however much the widest line overruns its share of the frame. Text
// width is linear in font size, so the measured widths scale with the same
// factor and no second measuring pass is needed.
// -------------------------------------------------------------------------
const rawPad = PILL_PAD * PILL_H * nominalEm;
const rawGap = PILL_GAP * PILL_H * nominalEm;
const rawLockup =
(metrics?.prefixWidth ?? 0) +
rawGap +
Math.max(0, ...(metrics?.statusWidths ?? [0])) +
2 * rawPad;
const act1Fit = metrics ? fitScale(rawLockup, ACT1_FIT * width) : 1;
const rawChip =
Math.max(0, ...(metrics?.chipWidths ?? [0])) +
2 * CHIP_PAD_X * nominalChipEm;
const chipFit = metrics ? fitScale(rawChip, (1 - 2 * CHIP_INSET) * width) : 1;
const em = nominalEm * act1Fit;
const chipEm = nominalChipEm * chipFit;
const pillH = PILL_H * em;
const pillPad = PILL_PAD * pillH;
const gap = PILL_GAP * pillH;
const prefixWidth = (metrics?.prefixWidth ?? 0) * act1Fit;
const pillWidths = (metrics?.statusWidths ?? labels.map(() => 0)).map(
(w) => w * act1Fit + 2 * pillPad,
);
/** Which label is up, and how far the swap into it has progressed. */
const widthSeconds = m.widthSeconds * fps;
const rollSeconds = m.rollSeconds * fps;
const { index, since } = statusAt({
frame,
introFrames,
statusHold,
count: labels.length,
});
// Index 0 opens from nothing rather than cutting in at full width. The tape
// cannot settle this — its first recorded frame already has a pill, and the
// reference's own calling->typing morph is arithmetically inseparable from
// the intro's tail — so this runs the same curve the other morphs run, over
// the intro, which is the least invented thing available.
const widthP =
index === 0
? m.widthEase(Math.min(1, Math.max(0, frame / introFrames)))
: m.widthEase(Math.min(1, Math.max(0, since / widthSeconds)));
const rollP =
index === 0 ? 1 : m.rollEase(Math.min(1, Math.max(0, since / rollSeconds)));
const pillW = interpolate(
widthP,
[0, 1],
[index === 0 ? 0 : (pillWidths[index - 1] ?? 0), pillWidths[index] ?? 0],
);
// The whole lockup arrives on one slow scale settle. The reference's is still
// drifting -7% two seconds in; this one lands, because a settle nobody can see
// is frames spent on travel that only costs sharpness.
const groupScale = spring({
frame,
fps,
config: { damping: 26, stiffness: 90, mass: 1.4 },
from: 1.16,
to: 1,
});
const exitP = settle((frame - beat) * (1 / m.exitSeconds / fps), 0.28);
const exitY = frame < beat ? 0 : -exitP * 0.62 * height;
const total = prefixWidth + gap + pillW;
const originX = (width - total) / 2;
const cy = pillCenterY * height;
// Only the Player gets `will-change`: a render is spread across parallel tabs
// and each inherits a stale raster, so the same style comes out as several
// different rasterisations and the type shimmers while standing still.
const promote = getRemotionEnvironment().isRendering
? null
: ({ willChange: "transform" } as const);
const typeStyle = {
fontFamily: face,
fontWeight,
// Hinting re-snaps every stem as the size slides, so the letterforms boil.
// Off, shape drift over a scale falls from 3.41% to 0.22%.
textRendering: "geometricPrecision" as const,
whiteSpace: "nowrap" as const,
};
return (
<AbsoluteFill style={{ backgroundColor: page, overflow: "hidden" }}>
<AbsoluteFill style={{ backgroundColor: field, opacity: 1 - fadeP }} />
{metrics ? null : (
<Measuring
glyphs={glyphs}
labels={labels}
chipLabels={chipLabels}
em={em}
chipEm={chipEm}
typeStyle={typeStyle}
letterRefs={letterRefs}
prefixRef={prefixRef}
baselineRef={baselineRef}
statusRefs={statusRefs}
chipRefs={chipRefs}
/>
)}
{metrics && frame < beat + m.exitSeconds * fps ? (
<div
style={{
position: "absolute",
left: 0,
top: 0,
transform: `translateY(${exitY}px) scale(${groupScale})`,
transformOrigin: `${width / 2}px ${cy}px`,
width,
height,
...promote,
}}
>
<Prefix
glyphs={glyphs}
metrics={metrics}
frame={frame}
fps={fps}
em={em}
fit={act1Fit}
spring={m.letterSpring}
stagger={m.letterStagger}
x={originX}
cy={cy}
color={prefixInk}
typeStyle={typeStyle}
/>
<Pill
labels={labels}
index={index}
rollP={rollP}
x={originX + prefixWidth + gap}
cy={cy}
width={pillW}
height={pillH}
em={em}
fill={pillFill}
ink={labelInk}
radius={pillRadius ?? PILL_R * pillH}
travel={m.rollTravel * pillH}
typeStyle={typeStyle}
/>
</div>
) : null}
{metrics ? (
<Chips
labels={chipLabels}
widths={metrics.chipWidths.map((w) => w * chipFit)}
frame={frame}
fps={fps}
beat={beat}
stagger={chipStagger}
em={chipEm}
width={width}
height={height}
fills={fillCycle}
ink={chipInk}
edge={chipEdge}
radius={chipRadius}
borderWidth={chipBorderWidth}
weight={chipFontWeight}
tau={m.scrollTau}
typeStyle={typeStyle}
/>
) : null}
</AbsoluteFill>
);
}
/**
* The intro cascade: every glyph sits at its **final advance** and scales about
* its own baseline, staggered left to right.
*
* Measured, not guessed. Tracking one 'o' by its counter gives 1.01x → 1.45x →
* 1.00x while its stroke-to-height ratio holds at 0.149 ± 0.006 — so nothing is
* animating a weight or width axis, it is a plain scale, and the letters only
* *look* heavier early because at 1.45x they overlap their neighbours' fixed
* slots. The prefix's total ink span is unchanged from the first frame to the
* last, which is only possible if the layout is static and the transform is
* per-glyph.
*
* The one deliberate departure from the reference is the pivot. The reference
* scales each letter about its centre, which drags the baseline; a moving
* baseline climbs the pixel grid in whole-pixel jumps, because the rasteriser
* has no vertical sub-pixel positioning at all. Pivoting on the baseline takes
* judder from 0.284px to 0.014px and direction reversals from 29 to 0, and it
* costs a downward growth nobody can name.
*/
function Prefix({
glyphs,
metrics,
frame,
fps,
em,
fit,
spring: springConfig,
stagger,
x,
cy,
color,
typeStyle,
}: {
glyphs: string[];
metrics: Metrics;
frame: number;
fps: number;
em: number;
/** Scale the measured glyph offsets were taken at, relative to `em`. */
fit: number;
spring: { damping: number; stiffness: number; mass: number };
stagger: number;
x: number;
cy: number;
color: string;
typeStyle: React.CSSProperties;
}) {
return (
<div
style={{
position: "absolute",
left: x,
top: cy - em,
height: 2 * em,
color,
fontSize: em,
lineHeight: 2,
...typeStyle,
}}
>
{glyphs.map((g, i) => {
// Stagger of one frame. Measured: the shared scale curve takes about one
// 30fps frame to travel 0.71x → 1.01x, which is the gap the reference
// shows between adjacent letters.
const p = spring({
frame: frame - i * stagger,
fps,
config: springConfig,
});
// The spring carries the overshoot; `interpolate` extrapolates past 1,
// so mapping [0,1] onto [0.1,1] puts the peak at 1.4x on its own — no
// second curve, and nothing to keep in step with the damping.
const s = interpolate(p, [0, 1], [0.1, 1]);
return (
<span
// biome-ignore lint/suspicious/noArrayIndexKey: positional glyph slot
key={i}
style={{
position: "absolute",
left: (metrics.letters[i]?.left ?? 0) * fit,
top: 0,
transform: `scale(${s})`,
transformOrigin: `50% ${metrics.baseline * fit}px`,
...typeStyle,
}}
>
{g === " " ? " " : g}
</span>
);
})}
</div>
);
}
/**
* The pill: a width that animates straight through a label that never changes
* size, and two stacked labels rolling upward behind a hard clip.
*
* The label is laid out at its full final width and centred, and the widening
* pill reveals it from the middle out — proven on the reference by the two
* inter-word gaps of "sharing a moment" sitting at x = 486.0 and 521.5 across
* three frames while the pill grew 83px. So the width cannot be derived from a
* padded text box each frame; it is its own animated quantity.
*
* There is no crossfade. The label ink's mean brightness holds inside a 4% band
* through every swap, including the frames where both labels are half-clipped —
* a fade would collapse it toward the fill. Pure translation plus clipping.
*/
function Pill({
labels,
index,
rollP,
x,
cy,
width,
height,
em,
fill,
ink,
radius,
travel,
typeStyle,
}: {
labels: string[];
index: number;
rollP: number;
x: number;
cy: number;
width: number;
height: number;
em: number;
fill: string;
ink: string;
radius: number;
travel: number;
typeStyle: React.CSSProperties;
}) {
const showOutgoing = rollP < 1 && index > 0;
const label = (text: string, offset: number) => (
<div
style={{
position: "absolute",
left: "50%",
top: 0,
height,
display: "flex",
alignItems: "center",
transform: `translate(-50%, ${offset}px)`,
color: ink,
fontSize: em,
...typeStyle,
}}
>
{text}
</div>
);
return (
<div
style={{
position: "absolute",
left: x,
top: cy - height / 2,
width,
height,
borderRadius: radius,
backgroundColor: fill,
overflow: "hidden",
}}
>
{showOutgoing ? label(labels[index - 1] ?? "", -rollP * travel) : null}
{label(labels[index] ?? "", (1 - rollP) * travel)}
</div>
);
}
/**
* Act 2: chips ride a field that steps, not scrolls.
*
* The field is dead still between beats — residual velocity under 1px per
* captured frame — and then jumps exactly one slot with a hard ease-out on the
* frame a new chip appears. The chips themselves do nothing: measured across
* every frame each is visible, width and fill are final from the first frame and
* never change, and two chips in the same step travelled 140.02px and 139.34px,
* so it is one transform on the container rather than per-chip animation.
*/
function Chips({
labels,
widths,
frame,
fps,
beat,
stagger,
em,
width,
height,
fills,
ink,
edge,
radius,
borderWidth,
weight,
tau: scrollTau,
typeStyle,
}: {
labels: string[];
widths: number[];
frame: number;
fps: number;
beat: number;
stagger: number;
em: number;
width: number;
height: number;
fills: string[];
ink: string;
edge: string;
radius?: number;
borderWidth?: number;
weight: number;
tau: number;
typeStyle: React.CSSProperties;
}) {
if (frame < beat) return null;
const chipH = em * (1 + 2 * CHIP_PAD_Y);
const step = chipH + CHIP_GAP * height;
const tau = scrollTau * fps;
// How many chips have arrived, and how far the current step has run.
const { arrived, since } = chipAt({
frame,
beat,
stagger,
count: labels.length,
});
const p = settle(since, tau);
// The newest chip comes to rest one gap clear of the bottom edge. Landing it
// flush reads as clipped rather than as arrived — its border sits on the
// frame edge and half of it is lost to the codec.
const fieldY = height - CHIP_GAP * height - chipH - (arrived - 2 + p) * step;
return (
<div style={{ position: "absolute", inset: 0, overflow: "hidden" }}>
{labels.slice(0, arrived).map((text, i) => {
const w = (widths[i] ?? 0) + 2 * CHIP_PAD_X * em;
const left = i % 2 === 0;
const fill = fills[i % fills.length] ?? fills[0];
return (
// biome-ignore lint/suspicious/noArrayIndexKey: positional chip slot
<Item key={i} index={i}>
<div
style={{
position: "absolute",
top: 0,
left: left ? CHIP_INSET * width : undefined,
right: left ? undefined : CHIP_INSET * width,
transform: `translateY(${fieldY + i * step}px)`,
width: w,
height: chipH,
borderRadius: radius ?? CHIP_R * chipH,
backgroundColor: fill,
// A hairline and nothing else. The reference has no shadow — cream
// measured through a chip's top edge recovers to its flat value
// within 2px on both sides, with no directional darkening — and a
// drop shadow under a light chip on a light page is a grey smear.
border: `${borderWidth ?? CHIP_BORDER * chipH}px solid ${edge}`,
display: "flex",
alignItems: "center",
justifyContent: "center",
color: ink,
fontSize: em,
...typeStyle,
fontWeight: weight,
}}
>
{text}
</div>
</Item>
);
})}
</div>
);
}
/**
* The hidden, untransformed copy every measurement is taken from. Rendered only
* until `metrics` exists, and `delayRender` holds frame 0 until then.
*/
function Measuring({
glyphs,
labels,
chipLabels,
em,
chipEm,
typeStyle,
letterRefs,
prefixRef,
baselineRef,
statusRefs,
chipRefs,
}: {
glyphs: string[];
labels: string[];
chipLabels: string[];
em: number;
chipEm: number;
typeStyle: React.CSSProperties;
// Plain `{ current }` shapes, not RefObject: React 18's RefObject is
// read-only and rejects what `useRef(null)` hands back in a React 19 project.
letterRefs: { current: (HTMLSpanElement | null)[] };
prefixRef: { current: HTMLSpanElement | null };
baselineRef: { current: HTMLSpanElement | null };
statusRefs: { current: (HTMLSpanElement | null)[] };
chipRefs: { current: (HTMLSpanElement | null)[] };
}) {
return (
<div
aria-hidden
style={{
position: "absolute",
visibility: "hidden",
left: 0,
top: 0,
pointerEvents: "none",
// Each measured span is `inline-block` and gets its own line, so it
// reports its own text width. Left as blocks they fill this
// shrink-to-fit box and every label comes back the widest one's width —
// which is four identical pills and a prefix pushed off the frame.
display: "flex",
flexDirection: "column",
alignItems: "flex-start",
}}
>
<span
ref={prefixRef}
style={{ fontSize: em, lineHeight: 2, ...typeStyle }}
>
{glyphs.map((g, i) => (
<span
// biome-ignore lint/suspicious/noArrayIndexKey: positional glyph slot
key={i}
ref={(el) => {
letterRefs.current[i] = el;
}}
style={{ display: "inline-block" }}
>
{g === " " ? " " : g}
</span>
))}
{/* A zero-sized inline-block sits ON the baseline, so `offsetTop` reads
it rather than a line-height ratio anyone has to guess. */}
<span
ref={baselineRef}
style={{ display: "inline-block", width: 0, height: 0 }}
/>
</span>
{labels.map((text, i) => (
<span
// biome-ignore lint/suspicious/noArrayIndexKey: positional label slot
key={i}
ref={(el) => {
statusRefs.current[i] = el;
}}
style={{ display: "inline-block", fontSize: em, ...typeStyle }}
>
{text}
</span>
))}
{chipLabels.map((text, i) => (
<span
// biome-ignore lint/suspicious/noArrayIndexKey: positional chip slot
key={i}
ref={(el) => {
chipRefs.current[i] = el;
}}
style={{ display: "inline-block", fontSize: chipEm, ...typeStyle }}
>
{text}
</span>
))}
</div>
);
}