Text

Check Cycle

Rotating words beside a checkbox: a sentence that finishes itself several ways. "Create your own" sits left of a ticked shadcn-style checkbox and the word to its right rolls up out of a slot — Intros, Demos, Launches, Changelogs, Tutorials, And more — then the line steps back a little and rests.

Check Cycle preview, rendered with Remotion.

Source

components/kuchi/check-cycle.tsx
"use client";
import { loadFont as loadSans } from "@remotion/google-fonts/Inter";
import { type CSSProperties, useEffect, useId, useState } from "react";
import {
AbsoluteFill,
continueRender,
delayRender,
Easing,
useCurrentFrame,
useVideoConfig,
} from "remotion";
import {
resolveFont,
type KuchiTheme,
useKuchiTheme,
} from "@/lib/kuchi-ui";
/**
* A sentence that finishes itself over and over: "Create your own ☑ Intros",
* then Demos, Launches, Changelogs, Tutorials, "And more" — each word rolling
* up out of a slot beside a ticked checkbox — then the line steps back a little
* and rests.
*
* ## Everything here was measured off a recording, frame by frame
*
* The numbers below are not taste. They were recovered from a 2.17 second,
* 718 × 394 screen capture (65 frames) by fitting renders of this scene to it
* in BT.709 Y′CbCr, through a model of the capture's own resampling kernel:
*
* - the recording is a 30fps video captured at a jittery ~30Hz: its
* timestamps wander ±8ms, but snapped to a 30fps grid every capture frame
* is exactly one source frame — none doubled, none dropped. Fitted on that
* clock instead of the stamps, every curve below came out clean.
* - the two words in the slot move as ONE strip — the gap between the word
* leaving and the word arriving is constant to 0.2px on every frame of a
* roll — so it is one curve, not an ease-in exit and an ease-out entrance.
* It is `cubic-bezier(0.65, 0, 0.35, 1)` over exactly 0.5s, a roll every
* 20 frames: 0.076px RMS across both rolls. The runner-up, quart in-out,
* is 0.10; the CSS `ease-in-out` is 0.69.
* - the strip does not travel the same distance every time: 44.19px, then
* 42.27px. Both are shipped, in `TRAVEL`, and cycle.
*
* ## The type is Inter 3, and that was measured too
*
* Fingerprinted on the five words the recording shows, at matched width:
* Inter 500 is 0.45px RMS from the reference, the next face (Be Vietnam Pro)
* 0.48, Helvetica 0.50, Geist 0.61. SF Pro, fitted outline against outline,
* is 37% worse than Inter. And it is Inter *3*: the same fit against Inter
* 3.19 is 12% closer across all four lines than against the Inter 4 Google
* serves today, and a third closer on the lead-in alone. So 3.19 is loaded
* (OFL, from fontsource), with Google's Inter behind it as the fallback.
*
* ## The checkbox sits still, and everything is laid out from it
*
* The lead-in is right-aligned to the box and the word left-aligned from it, so
* the sentence survives new copy: the box never moves, only the words around it
* change width — which is also what the reference does when "Docs" becomes
* "And more".
*/
const { fontFamily: SANS } = loadSans("normal", {
weights: ["500"],
subsets: ["latin"],
});
const FACE = "Check Cycle Inter";
const FACE_URL =
"https://cdn.jsdelivr.net/npm/@fontsource/inter@4.5.15/files/inter-latin-500-normal.woff2";
let faceLoad: Promise<unknown> | null = null;
function loadFace(): Promise<unknown> {
if (faceLoad) return faceLoad;
if (typeof FontFace === "undefined") {
faceLoad = Promise.resolve();
return faceLoad;
}
const face = new FontFace(FACE, `url(${FACE_URL}) format("woff2")`, {
weight: "500",
});
document.fonts.add(face);
// A face that fails to load leaves Google's Inter to paint — close, not exact.
faceLoad = face.load().catch(() => undefined);
return faceLoad;
}
/* ─────────────────────────────────────────────────────────────────────────
The scene, in the reference's own 718 × 394 pixels
───────────────────────────────────────────────────────────────────────── */
export const REF_W = 718;
export const REF_H = 394;
/** Type size of both halves of the sentence. Fitted per line: 21.62–21.97. */
export const SIZE = 21.78;
/** Where the lead-in's advance ends — it is right-aligned to this x. */
export const LEAD_END = 340.04;
/** The lead-in's baseline. */
export const LEAD_BASE = 203.01;
/** Where the word's advance starts. */
export const WORD_X = 379.1;
/** The word's baseline: 1.5px below the lead-in's, on every word shown. */
export const WORD_BASE = 204.97;
/** The checkbox, as x, y, width, height, corner radius. */
export const BOX = { x: 345.11, y: 183.71, w: 27.03, h: 27.59, r: 6.53 };
/** The tick, as three points in the box's own coordinates, and its stroke. */
export const TICK: readonly (readonly [number, number])[] = [
[5.468, 13.785],
[11.827, 18.695],
[20.72, 8.888],
];
export const TICK_W = 2.72;
/**
* The slot the words roll through: a hard clip, top and bottom. Fitted as a
* feathered mask across eight frames with both words visible — the feathers
* came back at 2.1px and 1.0px, which is the capture's blur, not a fade.
*/
export const SLOT = [171.37, 223.62] as const;
/** How far the strip travels on each roll, in turn. */
export const TRAVEL = [44.19, 42.27] as const;
/** When the first roll starts, how often a roll comes, and how long it takes. */
export const ROLL_AT = 0.0324;
export const ROLL_EVERY = 0.667;
export const ROLL_FOR = 0.5;
/** The roll's curve: the in-out cubic. */
export const ROLL_EASE = Easing.bezier(0.65, 0, 0.35, 1);
/** How long the last word holds after its roll starts, before the step back. */
export const HOLD = 1.004;
/**
* The step back: the line shrinks about the frame's centre to `ZOOM_TO` and
* rests there. The recording falls all the way to nothing; this keeps only the
* start of that — a settle, not an exit.
*/
export const PIVOT = [359.14, 197.52] as const;
export const ZOOM_TO = 0.8;
export const ZOOM_FOR = 0.6;
export const ZOOM_EASE = Easing.bezier(0.65, 0, 0.35, 1);
/** Frames' worth of rest at the smaller size before the scene ends. */
export const ZOOM_REST = 0.2;
const unit = (v: number) => Math.min(1, Math.max(0, v));
/** Strip travel at `now` seconds, for a list of `n` words. */
export function stripAt(now: number, n: number): number {
let s = 0;
for (let k = 0; k < n - 1; k++) {
const p = unit((now - (ROLL_AT + k * ROLL_EVERY)) / ROLL_FOR);
s += (TRAVEL[k % TRAVEL.length] ?? 0) * ROLL_EASE(p);
}
return s;
}
/** Where word `k` rests on the strip. */
export function restOf(k: number): number {
let c = 0;
for (let j = 0; j < k; j++) c += TRAVEL[j % TRAVEL.length] ?? 0;
return c;
}
/** When the step back starts, for `n` words. */
export function zoomStart(n: number): number {
return ROLL_AT + Math.max(0, n - 2) * ROLL_EVERY + HOLD;
}
/** Camera scale at `now`: 1, easing down to `ZOOM_TO`. */
export function zoomAt(now: number, n: number): number {
return 1 - (1 - ZOOM_TO) * ZOOM_EASE(unit((now - zoomStart(n)) / ZOOM_FOR));
}
/** Seconds from the first frame to the end: rolls, hold, step back, rest. */
export function sceneLength(n: number): number {
return zoomStart(n) + ZOOM_FOR + ZOOM_REST;
}
/**
* A line of type that can sit — and move — a fraction of a pixel.
*
* Chrome rounds a glyph run's baseline to a whole device pixel, in HTML and
* SVG alike, with or without `will-change`. On the roll's slow lift-off that
* is measured, not theoretical: the word held still for four frames and then
* jumped a pixel, three times, before it started to move at all.
*
* So the line is painted twice, one device pixel apart, both copies placed ON
* a whole pixel so there is nothing left to round, and cross-faded by the
* fraction in between. `plus-lighter` adds the two copies' coverage instead of
* stacking one over the other, so the blend is exactly linear: a baseline at
* 0.25 of a pixel reads as 0.25, and the ink's centroid moves in steps of
* 1/8 px when it is asked to (measured). That is the resample a video of this
* line would have — which is what the reference is.
*/
function Line({
x,
y,
dev,
anchor,
style,
children,
}: {
x: number;
y: number;
dev: { a: number; b: number };
anchor?: "end";
style: CSSProperties;
children: string;
}) {
const d = dev.a * y + dev.b;
const lo = Math.floor(d);
const f = d - lo;
// A thousandth of a pixel inside the row, so the rounding has nowhere to go.
const at = (row: number) => (row + 1e-3 - dev.b) / dev.a;
return (
<g style={{ isolation: "isolate" }}>
{[
[lo, 1 - f],
[lo + 1, f],
].map(([row, w]) => (
<text
key={row}
x={x}
y={at(row ?? 0)}
textAnchor={anchor}
style={{ ...style, opacity: w, mixBlendMode: "plus-lighter" }}
>
{children}
</text>
))}
</g>
);
}
export interface CheckCycleProps {
/** The part of the sentence that never changes. */
headline?: string;
/** The words that finish it, in order, comma separated. */
words?: string;
theme?: Partial<KuchiTheme>;
mode?: "light" | "dark";
fontFamily?: string;
}
export function CheckCycle({
headline = "Create your own",
words = "Intros, Demos, Launches, Changelogs, Tutorials, And more",
theme,
mode = "light",
fontFamily = "Default",
}: CheckCycleProps) {
const frame = useCurrentFrame();
const { fps, width, height } = useVideoConfig();
const t = useKuchiTheme(theme, mode);
const face = resolveFont(fontFamily) ?? `"${FACE}", ${SANS}`;
const [handle] = useState(() => delayRender("check-cycle: loading Inter 3"));
useEffect(() => {
loadFace().then(() => continueRender(handle));
}, [handle]);
const id = useId().replace(/:/g, "");
const list = words
.split(",")
.map((w) => w.trim())
.filter(Boolean);
const n = Math.max(1, list.length);
const now = frame / fps;
/**
* One reference pixel, and the offset that centres the layout. Scaled to
* whichever side is tighter, so a render at the reference's dimensions *is*
* the reference's dimensions and nothing resamples mid-comparison.
*/
const u = Math.min(width / REF_W, height / REF_H);
const s = stripAt(now, n);
const z = zoomAt(now, n);
const type = {
fontFamily: face,
fontWeight: 500,
fontSize: SIZE,
fill: t.foreground,
// Unhinted outlines, so the sub-pixel `Line` blend moves the shape it
// drew rather than a re-hinted one.
textRendering: "geometricPrecision",
} as const;
const top = (height - REF_H * u) / 2;
// A Remotion render's `scale` is the page's devicePixelRatio.
const dpr = typeof window === "undefined" ? 1 : window.devicePixelRatio || 1;
// A baseline, y in scene units, lands on device row a·y + b.
const [x0, y0] = PIVOT;
const dev = { a: dpr * u * z, b: dpr * (top + u * y0 * (1 - z)) };
return (
<AbsoluteFill style={{ backgroundColor: t.background }}>
<svg
width={REF_W * u}
height={REF_H * u}
viewBox={`0 0 ${REF_W} ${REF_H}`}
style={{
position: "absolute",
left: (width - REF_W * u) / 2,
top: (height - REF_H * u) / 2,
overflow: "visible",
}}
>
<defs>
<clipPath id={`${id}-slot`}>
<rect x={0} y={SLOT[0]} width={REF_W} height={SLOT[1] - SLOT[0]} />
</clipPath>
</defs>
<g
transform={`translate(${x0} ${y0}) scale(${z}) translate(${-x0} ${-y0})`}
>
<Line x={LEAD_END} y={LEAD_BASE} dev={dev} anchor="end" style={type}>
{headline}
</Line>
<rect
x={BOX.x}
y={BOX.y}
width={BOX.w}
height={BOX.h}
rx={BOX.r}
fill={t.primary}
/>
<polyline
points={TICK.map(([a, b]) => `${BOX.x + a},${BOX.y + b}`).join(" ")}
fill="none"
stroke={t.primaryForeground}
strokeWidth={TICK_W}
strokeLinecap="round"
strokeLinejoin="round"
/>
<g clipPath={`url(#${id}-slot)`}>
{list.map((word, k) => {
const y = WORD_BASE + restOf(k) - s;
// Off the slot entirely: nothing to paint.
if (Math.abs(y - WORD_BASE) > SLOT[1] - SLOT[0] + SIZE)
return null;
return (
<Line
key={`${k}-${word}`}
x={WORD_X}
y={y}
dev={dev}
style={type}
>
{word}
</Line>
);
})}
</g>
</g>
</svg>
</AbsoluteFill>
);
}