Text

Punch Lines

Kinetic typography title cards: bold statements that cut hard between beats. A run of full-frame title cards that cut hard between beats.

Punch Lines preview, rendered with Remotion.

Source

components/kuchi/punch-lines.tsx
"use client";
import { loadFont as loadSans } from "@remotion/google-fonts/Inter";
import { Fragment, useEffect, useMemo, useRef, useState } from "react";
import {
AbsoluteFill,
continueRender,
delayRender,
Easing,
getRemotionEnvironment,
useCurrentFrame,
useVideoConfig,
} from "remotion";
import {
Item,
resolveFont,
type KuchiTheme,
useKuchiTheme,
} from "@/lib/kuchi-ui";
/**
* A run of full-frame title cards that cut hard between beats.
*
* Two looks, and the sequence alternates them:
*
* - **slide** — the statement card. Its lines are already at full size when the
* card opens, sitting left of centre; each one is flicked right and settles
* home on a critically damped curve, one line behind the last. It leaves by
* rushing past the camera.
* - **punch** — the hero line. Every word starts a third of its size and swells
* into place in a wave, while the whole line pushes slowly forward for as long
* as it is on screen. It leaves on a cut.
*
* It paints a whole page rather than a control, so it takes the design system's
* two page colours — `background` and `foreground` — and inverts with `mode`.
* Only the accent is a bare prop, because an accent that is supposed to shout is
* the design and not a token.
*
* ## Where the numbers come from
*
* Every curve here was fitted to a reference recording, frame by frame, not
* eyeballed. The recording is 24fps variable-rate, so each fit is against the
* frames' real timestamps and the results are stored in **seconds** — a frame
* index is not a clock.
*
* | beat | signal | fit |
* | --- | --- | --- |
* | slide | each line's ink centroid, 37 frames, both lines at once | `(A + Bt)·e^(-λt)`, **rms 0.42px** |
* | punch | per-word ink width, 27 frames | scale `0.32 → 1` on an in-out cubic |
* | push | per-word ink width once the wave has landed | linear, `+20.5%/s` |
* | rush | ink second moment (`rmsX`/`rmsY` agreed to 0.02%, so it is a pure scale) | `1/(1 − travel)`, travel on a hard ease-in |
*
* Two of those are worth keeping because they are the sort of thing you cannot
* see and would never guess:
*
* - **The slide is not a spring.** A damped sinusoid fits the overshoot and then
* demands an undershoot that is not there; a spring released from rest cannot
* overshoot 36px without starting 2,000px out. What actually fits, to under
* half a pixel over 37 frames, is a **critically damped** system given an
* initial kick: `(A + Bt)·e^(-λt)`. It starts 0.74em left of centre, sails
* 0.71em past it, and comes home without ever crossing back.
* - **The rush is a scale about the frame centre, not the type's own centre.**
* Solving the ink centroid for the pivot lands on the middle of the frame in
* both axes, which is why the lower line dives *down* out of shot while the
* upper one climbs out of the top.
*
* ## The cadence, and why a card is already moving when you first see it
*
* `holds` is time **on screen**, one entry per card, so the rhythm is exactly
* what you wrote and no card can ever bleed over the one in front of it. The
* cards are a straight run of hard cuts.
*
* The one thing that happens off screen is `lead`: a card's clock starts a few
* frames before its cut, so it is caught mid-entrance rather than starting from
* nothing. That is the reference's own trick — its third card is at 87% of its
* size on the first frame you can see it, with not one coloured pixel on the
* frame before — and it is most of what makes a cut read as expensive rather
* than abrupt. `lead: 0` plays every entrance in full.
*/
const { fontFamily: SANS } = loadSans("normal", {
weights: ["400", "500", "600", "700"],
subsets: ["latin"],
});
/** How a card arrives, and how it leaves. */
export type PunchLineStyle = "slide" | "punch";
export interface PunchLinesProps {
/**
* The whole script in one string. `|` starts a new card, `/` starts a new
* line inside a card:
*
* ```
* "Ready-made scenes / for Remotion. | One command. Own it. | kuchi."
* ```
*/
script?: string;
/**
* Per-card look — `slide` or `punch` — comma separated. The last value repeats,
* so `"slide,punch"` gives the first card the statement look and every card
* after it the hero look.
*/
styles?: string;
/**
* Per-card type size, as a multiple of `fontSize`, comma separated; the last
* value repeats. A one-word payoff wants to be much bigger than the sentence
* that set it up — that is the whole point of the beat.
*/
sizes?: string;
/**
* Per-card length in frames, comma separated; the last value repeats. Measured
* from the frame the card's own clock starts, so it includes the entrance and
* the exit.
*/
holds?: string;
/** Which card is painted in `accentColor`, counting from 1. `0` = none. */
accentBeat?: number;
/**
* Frames of a card's entrance that run before it is cut to — it arrives
* already moving instead of from nothing. `0` plays every entrance in full.
*/
lead?: number;
/** Type size of a `size = 1` card, in px. */
fontSize?: number;
fontWeight?: number | string;
/**
* Baseline-to-baseline distance inside a card, in em. Tight on purpose — a
* statement card is a lockup, not a paragraph — but a face's descender depth
* and ascender height both eat into the gap, so a number carried over from
* another face will collide rather than kiss.
*/
lineHeight?: number;
/** Resting letter-spacing. */
letterSpacing?: string;
/**
* Resting word-spacing. The reference crushes it almost to nothing — measured,
* its word gaps are 0.17em where the face's own space is 0.26em — which is what
* makes a line read as one block of type rather than four words.
*/
wordSpacing?: string;
/** The ground the cards are cut on. Defaults to the design system's page. */
ground?: string;
/** The type. Defaults to the design system's foreground. */
ink?: string;
/**
* The one card that is not the type colour.
*
* A prop and not `theme.primary` on purpose: an accent that is *supposed* to
* shout is the design, not a token — see the design system's note on burned-in
* video type. Swap it for your brand's and the rest of the card still follows
* whatever palette it was dropped into.
*/
accentColor?: string;
/** Design-system token overrides. */
theme?: Partial<KuchiTheme>;
mode?: "light" | "dark";
/**
* The face the cards are set in — a label from `fonts.ts` ("Geist", "Outfit",
* "Montserrat") or a CSS family you have loaded yourself. Unset, the cards are
* set in Inter, the same face the rest of the text tier uses.
*/
fontFamily?: string;
/** How far left of centre a slide card's line starts, in em. */
slideFrom?: number;
/** The kick that throws it right, in em per second. */
slideKick?: number;
/** How fast the slide settles. Higher is tighter. */
slideSettle?: number;
/** Frames between one line of a slide card leaving and the next. */
lineStagger?: number;
/**
* How far below the optical centre a slide card hangs, in em. The reference's
* two-line statement sits low so the eye lands on the first line rather than
* in the gap between them.
*/
slideDrop?: number;
/**
* Shutter angle for the slide's motion blur, as a fraction of the frame — `1`
* is a fully open shutter, `0` turns it off.
*
* A browser animating `translate` draws every frame perfectly sharp. Film, and
* anything rendered with a shutter, does not: a line travelling 30px in a
* frame is smeared across those 30px, and its absence is most of what makes a
* fast move read as "computer graphics". The reference has it — measured, its
* first frame's ink is spread by exactly the frame's own travel — so this
* smears the line horizontally by the distance it covered, and by nothing at
* all once it has stopped.
*/
motionBlur?: number;
/** The size a punch card's word starts at, relative to its final size. */
punchFrom?: number;
/** Frames a word takes to swell into place. */
punchFrames?: number;
/** Frames between one word starting to swell and the next. */
wordStagger?: number;
/** The size a punch card's line opens at, relative to its final size. */
pushFrom?: number;
/** How fast the line keeps growing while it holds, per second. */
pushRate?: number;
/** Frames before a rushing card ends that it starts to rush. */
rushLead?: number;
/** Frames the rush would take to run its whole travel. */
rushFrames?: number;
/**
* How far the card travels toward the camera, as a fraction of its distance.
* `0.85` ends at 6.7× — long gone off every edge.
*/
rushTravel?: number;
/** Fraction of the frame width a line may occupy before it is scaled down. */
fit?: number;
speed?: number;
className?: string;
}
/**
* A word swelling into place. Symmetric in-out cubic: it leaves and arrives at a
* standstill, and spends its frames in the middle where you can see them.
*
* Fitted twice — on the last word of the second beat and on the single word of
* the third — and both landed on 11 frames at 30fps, which is the check that it
* is the real curve and not one that happened to fit one sample.
*/
const PUNCH_EASE = Easing.bezier(0.65, 0, 0.35, 1);
/**
* The card's travel toward the camera on the way out.
*
* Brutally eased in: 28% of the travel in the first 60% of the time, and the
* rest in the last 40%. That is what makes the exit read as a *rush* rather than
* a zoom — nothing appears to happen, and then the type is past you.
*/
const RUSH_EASE = Easing.bezier(1, 0, 0.48, 1);
/**
* The furthest a slide card's line ever gets from centre, in em — its start, or
* the far side of its overshoot, whichever is bigger. Needed to fit a card: the
* line has to be inside the frame at both ends of the swing, not just at rest.
*/
export function slideSwing(from: number, kick: number, settle: number): number {
// (A + Bt)·e^(-λt) turns over where B = λ(A + Bt). No kick, no turn — and the
// division would be an infinity that comes back as NaN and quietly disables
// the fit for the one card that most needs it.
const peakAt = kick > 0 ? Math.max(0, 1 / settle - from / kick) : 0;
const peak = (from + kick * peakAt) * Math.exp(-settle * peakAt);
return Math.max(Math.abs(from), Math.abs(peak));
}
/** Split a comma list, trimmed, empties dropped. */
const list = (s: string | undefined): string[] =>
(s ?? "")
.split(",")
.map((v) => v.trim())
.filter(Boolean);
/** Read index `i` out of a list, repeating the last value forever. */
const at = <T,>(values: T[], i: number, fallback: T): T =>
values.length === 0
? fallback
: (values[Math.min(i, values.length - 1)] as T);
export interface PunchBeat {
lines: string[][];
style: PunchLineStyle;
size: number;
accent: boolean;
/** Frame the card's own clock starts — `lead` frames before it is revealed. */
start: number;
/** Frame the card leaves the screen. */
end: number;
/** Frame the card is cut to, which is the frame the card in front of it ends. */
revealAt: number;
}
/**
* Parse the script and lay the cards out on the timeline.
*
* `holds[i]` is time **on screen**, so the cards are a straight run of hard cuts
* and the cadence is exactly what you wrote — no card can bleed over the one in
* front of it, whichever way that one leaves.
*
* `lead` is the only thing that happens off screen: a card's clock starts that
* many frames before its cut, so it arrives already moving rather than from
* nothing. Raise it and the cut lands harder; set it to 0 and every card plays
* its entrance in full.
*/
export function planPunchLines(
script: string,
styles: string,
sizes: string,
holds: string,
accentBeat: number,
lead: number,
): PunchBeat[] {
const texts = script
.split("|")
.map((s) => s.trim())
.filter(Boolean);
const styleList = list(styles) as PunchLineStyle[];
const sizeList = list(sizes).map(Number).filter(Number.isFinite);
const holdList = list(holds).map(Number).filter(Number.isFinite);
const beats: PunchBeat[] = [];
let revealAt = 0;
for (let i = 0; i < texts.length; i++) {
const style = at(styleList, i, "punch");
const hold = Math.max(1, at(holdList, i, 48));
beats.push({
lines: (texts[i] as string)
.split("/")
.map((l) => l.trim())
.filter(Boolean)
.map((l) => l.split(/\s+/)),
style: style === "slide" ? "slide" : "punch",
size: at(sizeList, i, 1),
accent: i + 1 === accentBeat,
// Nothing is behind the first card, so there is nothing for it to arrive
// out of — it starts where it is revealed.
start: i === 0 ? 0 : revealAt - lead,
revealAt,
end: revealAt + hold,
});
revealAt += hold;
}
return beats;
}
/** Total frames a script needs, so the config and the component cannot drift. */
export function punchLinesDuration(script: string, holds: string): number {
const n = script
.split("|")
.map((s) => s.trim())
.filter(Boolean).length;
const holdList = list(holds).map(Number).filter(Number.isFinite);
let total = 0;
for (let i = 0; i < n; i++) total += Math.max(1, at(holdList, i, 48));
return total;
}
interface FaceMetrics {
/** Top of the line box down to the baseline, at `fontSize` 100. */
baseline: number;
/**
* Per card, at `fontSize` 100: how far its first line's *ink* rises above the
* baseline, and how far its last line's ink falls below one.
*
* Both measured from the copy actually passed, because a card is centred on
* the ink you can see and nothing else knows where that is. A face's cap
* height is the wrong number twice over: some faces draw their ascenders
* taller than their caps, so a line with an ascender sits high; and a word
* with no ascender at all but a descender in it — a lowercase wordmark, say —
* is not a cap band, and centring it as one drops it half a descender low.
*/
inkAscent: number[];
inkDescent: number[];
}
export function PunchLines({
script = "Ready-made scenes / for Remotion. | One command. Own it. | kuchi.",
styles = "slide,punch",
sizes = "1,0.945,2.7",
holds = "48",
accentBeat = 3,
lead = 4,
fontSize = 93,
fontWeight = 600,
lineHeight = 0.89,
letterSpacing = "-0.022em",
wordSpacing = "-0.02em",
ground,
ink,
accentColor = "#ff1c8e",
theme,
mode,
fontFamily,
slideFrom = -0.737,
slideKick = 7.34,
slideSettle = 2.846,
lineStagger = 3.5,
slideDrop = 0.313,
motionBlur = 1,
punchFrom = 0.32,
punchFrames = 15,
wordStagger = 2.8,
pushFrom = 0.778,
pushRate = 0.205,
rushLead = 12.2,
rushFrames = 18,
rushTravel = 0.85,
fit = 0.92,
speed = 1,
className,
}: PunchLinesProps) {
const frame = useCurrentFrame() * speed;
const { width, fps } = useVideoConfig();
const t = useKuchiTheme(theme, mode);
const face = resolveFont(fontFamily ?? t.fontFamily) ?? SANS;
// A card is a full-bleed page, so it takes the page's own two colours rather
// than inventing a pair. Pass `mode="dark"` and the whole run inverts.
const paper = ground ?? t.background;
const type = ink ?? t.foreground;
const beats = useMemo(
() => planPunchLines(script, styles, sizes, holds, accentBeat, lead),
[script, styles, sizes, holds, accentBeat, lead],
);
// Two things have to be measured rather than assumed, both constant across
// every frame: where the baseline sits inside a line box, and how far each
// card's own first line rises above it. Together they place the block — a card
// is centred on its *ink*, not on its line boxes, which is what keeps a
// one-line hero optically centred while a two-line statement hangs from the
// same rule.
const probeRef = useRef<HTMLSpanElement>(null);
const baselineRef = useRef<HTMLSpanElement>(null);
const lineRefs = useRef<(HTMLSpanElement | null)[]>([]);
const [handle] = useState(() => delayRender("punch-lines: measure the face"));
const [metrics, setMetrics] = useState<FaceMetrics | null>(null);
const [lineWidths, setLineWidths] = useState<number[] | null>(null);
useEffect(() => {
const probe = probeRef.current;
if (!probe) {
continueRender(handle);
return;
}
// An empty, zero-sized inline-block sits with its bottom edge on the text
// baseline, so its offsetTop *is* the baseline — read off the real font
// metrics instead of guessed from a line-height ratio.
const baseline = baselineRef.current?.offsetTop ?? 88;
const firstLines = beats.map((b) => (b.lines[0] ?? []).join(" "));
const lastLines = beats.map((b) =>
(b.lines[b.lines.length - 1] ?? []).join(" "),
);
let inkAscent = firstLines.map(() => 70);
let inkDescent = lastLines.map(() => 0);
try {
const ctx = document.createElement("canvas").getContext("2d");
if (ctx) {
ctx.font = `${fontWeight} 100px ${face}`;
inkAscent = firstLines.map((text) => {
const a = ctx.measureText(text).actualBoundingBoxAscent;
return a > 0 ? a : 70;
});
inkDescent = lastLines.map((text) =>
Math.max(0, ctx.measureText(text).actualBoundingBoxDescent),
);
}
} catch {
// A context can be refused (a headless tab with no GPU, a hardened
// browser). 0.70em is a sane cap height for any grotesque.
}
const lineCount = beats.reduce((n, b) => n + b.lines.length, 0);
setLineWidths(
lineRefs.current
.slice(0, lineCount)
.map((el) => (el ? el.offsetWidth : 0)),
);
setMetrics({ baseline, inkAscent, inkDescent });
}, [handle, face, fontWeight, beats]);
// Release the render only once the measurement has re-rendered, so the very
// first captured frame already carries the correct geometry.
useEffect(() => {
if (metrics) continueRender(handle);
}, [metrics, handle]);
const M: FaceMetrics = metrics ?? {
baseline: 88,
inkAscent: beats.map(() => 70),
inkDescent: beats.map(() => 0),
};
// Index every line of every card into one flat list, so one hidden probe row
// measures them all and each card can look its own lines up by offset.
const lineIndex: number[] = [];
{
let n = 0;
for (const beat of beats) {
lineIndex.push(n);
n += beat.lines.length;
}
}
// `concat(...map)`, not `flatMap` (ES2019): stock Remotion types ES2015.
const allLines = ([] as { words: string[]; size: number }[]).concat(
...beats.map((beat) =>
beat.lines.map((words) => ({ words, size: beat.size })),
),
);
return (
<AbsoluteFill
className={className}
style={{
backgroundColor: paper,
fontFamily: face,
fontWeight,
// Hinting re-snaps every stem as a size slides, and the letterforms
// literally change shape frame to frame. This turns it off and renders
// the outline as it is — 15× steadier under a scale, measured. The
// slight softness is the absence of a lie, not blur.
textRendering: "geometricPrecision",
WebkitFontSmoothing: "antialiased",
}}
>
{/*
Two measuring rows, laid out and never painted, and separate on purpose:
the baseline probe reads a line box, and a line box grows to fit the
tallest thing on it. Share a row with a 250px card title and the baseline
it reports is that title's, not the type's.
*/}
<div
aria-hidden
style={{
position: "absolute",
top: 0,
left: 0,
visibility: "hidden",
pointerEvents: "none",
whiteSpace: "nowrap",
}}
>
<span
ref={probeRef}
style={{ fontSize: 100, lineHeight: `${lineHeight * 100}px` }}
>
Hxg
<span
ref={baselineRef}
style={{ display: "inline-block", width: 0, height: 0 }}
/>
</span>
</div>
<div
aria-hidden
style={{
position: "absolute",
top: 0,
left: 0,
visibility: "hidden",
pointerEvents: "none",
whiteSpace: "nowrap",
}}
>
{allLines.map((line, i) => (
<span
// biome-ignore lint/suspicious/noArrayIndexKey: the probe row is positional
key={i}
ref={(el) => {
lineRefs.current[i] = el;
}}
style={{
// inline-block, NOT block. A block-level child of a shrink-to-fit
// absolutely positioned box fills that box, so every probe reported
// the *widest line in the whole script* as its own width — and one
// long card quietly took a size off every other card.
display: "inline-block",
fontSize: fontSize * line.size,
lineHeight: `${lineHeight}em`,
letterSpacing,
wordSpacing,
}}
>
{line.words.join(" ")}
</span>
))}
</div>
{beats.map((beat, i) => (
<Card
// biome-ignore lint/suspicious/noArrayIndexKey: cards are positional
key={i}
beat={beat}
frame={frame}
fps={fps}
width={width}
fontSize={fontSize}
lineHeight={lineHeight}
letterSpacing={letterSpacing}
wordSpacing={wordSpacing}
metrics={M}
beatIndex={i}
widths={
lineWidths
? lineWidths.slice(
lineIndex[i] as number,
(lineIndex[i] as number) + beat.lines.length,
)
: null
}
color={beat.accent ? accentColor : type}
fit={fit}
slideFrom={slideFrom}
slideKick={slideKick}
slideSettle={slideSettle}
lineStagger={lineStagger}
slideDrop={slideDrop}
motionBlur={motionBlur}
punchFrom={punchFrom}
punchFrames={punchFrames}
wordStagger={wordStagger}
pushFrom={pushFrom}
pushRate={pushRate}
rushLead={rushLead}
rushFrames={rushFrames}
rushTravel={rushTravel}
/>
))}
</AbsoluteFill>
);
}
/**
* One card.
*
* Nothing here reflows: the type is laid out once at its resting size and every
* beat of the animation is a `scale` or a `translate` on top of it.
*/
function Card({
beat,
frame,
fps,
width,
fontSize,
lineHeight,
letterSpacing,
wordSpacing,
metrics,
beatIndex,
widths,
color,
fit,
slideFrom,
slideKick,
slideSettle,
lineStagger,
slideDrop,
motionBlur,
punchFrom,
punchFrames,
wordStagger,
pushFrom,
pushRate,
rushLead,
rushFrames,
rushTravel,
}: {
beat: PunchBeat;
frame: number;
fps: number;
width: number;
fontSize: number;
lineHeight: number;
letterSpacing: string;
wordSpacing: string;
metrics: FaceMetrics;
beatIndex: number;
widths: number[] | null;
color: string;
fit: number;
slideFrom: number;
slideKick: number;
slideSettle: number;
lineStagger: number;
slideDrop: number;
motionBlur: number;
punchFrom: number;
punchFrames: number;
wordStagger: number;
pushFrom: number;
pushRate: number;
rushLead: number;
rushFrames: number;
rushTravel: number;
}) {
if (frame < beat.revealAt || frame >= beat.end) return null;
// The card's own clock, in seconds. Everything below is fitted in seconds
// because the reference is variable-rate and a frame index is not a clock.
const t = (frame - beat.start) / fps;
// Longest line decides whether the whole card has to come down a size, so the
// block never changes shape when one line happens to be the long one — and it
// is fitted against the widest the card will ever be, not the width it is laid
// out at. A punch card keeps growing for its whole life and a slide card swings
// most of an em either side of centre; a fit that ignores both passes at frame
// one and runs off the stage later, which is the worst way to find out. The
// rush is left out on purpose: leaving the frame is what it is for.
const natural = widths?.length ? Math.max(...widths) : 0;
const maxPush =
beat.style === "punch"
? pushFrom + pushRate * ((beat.end - beat.start) / fps)
: 1;
const swing =
beat.style === "slide"
? slideSwing(slideFrom, slideKick, slideSettle) * fontSize * beat.size
: 0;
const need = natural * maxPush + 2 * swing;
const shrink = need > width * fit && need > 0 ? (width * fit) / need : 1;
const em = fontSize * beat.size * shrink;
const L = lineHeight * em;
// A card is centred on its *ink*: the top of its first line's tallest letter
// down to the bottom of its last line's lowest one. Flexbox centres the *line
// boxes* instead, and `dy` is the difference — one number, the same for every
// line of a card.
const baseline = (metrics.baseline / 100) * em;
const rise = ((metrics.inkAscent[beatIndex] ?? 70) / 100) * em;
const fall = ((metrics.inkDescent[beatIndex] ?? 0) / 100) * em;
const dy =
L / 2 -
baseline +
(rise - fall) / 2 +
(beat.style === "slide" ? slideDrop * em : 0);
// The push, and the rush, are both scales about the middle of the frame. The
// rush's pivot is not a guess: solving the ink centroid across the exit for
// the fixed point of the scale puts it within a couple of pixels of the frame
// centre in both axes.
const push =
beat.style === "punch" ? pushFrom + pushRate * Math.max(0, t) : 1;
const rushT = (frame - (beat.end - rushLead)) / fps;
const rush =
beat.style === "slide" && rushT > 0
? 1 /
(1 - rushTravel * RUSH_EASE(Math.min(1, rushT / (rushFrames / fps))))
: 1;
let wordIndex = 0;
return (
<AbsoluteFill
style={{
alignItems: "center",
justifyContent: "center",
color,
transform: `scale(${push * rush})`,
transformOrigin: "50% 50%",
// The compositor resampling a bitmap is the right trade in a live
// Player, where a line of type reshaped at a brand-new size every frame
// will not fit an 8ms budget — and the wrong one in a render, where
// parallel tabs inherit each other's stale rasters and a still frame
// shimmers. So it is on in one and off in the other.
...(getRemotionEnvironment().isRendering
? null
: { willChange: "transform" as const }),
}}
>
{/* The card Studio selects is its block of lines, not the full-frame
fill around it; it sits inside the push, so the outline scales too. */}
<Item index={beatIndex}>
<div
style={{
display: "flex",
flexDirection: "column",
alignItems: "center",
transform: `translateY(${dy}px)`,
}}
>
{beat.lines.map((words, li) => {
// Each line of a slide card leaves after the one above it, and the
// whole travel is one critically damped move: out at speed, past the
// mark by 0.71em, home without ever crossing back.
const lt = t - (li * lineStagger) / fps;
const slide = (u: number) =>
beat.style !== "slide"
? 0
: u <= 0
? slideFrom * em
: (slideFrom * em + slideKick * em * u) *
Math.exp(-slideSettle * u);
const x = slide(lt);
// The smear is the travel: a box blur one frame wide has a Gaussian
// equivalent of width/√12, and the reference measures at exactly that.
const sigma =
(motionBlur * Math.abs(x - slide(lt - 1 / fps))) / Math.sqrt(12);
const blurId = `punch-lines-${beatIndex}-${li}`;
return (
<div
// biome-ignore lint/suspicious/noArrayIndexKey: lines are positional
key={li}
style={{
whiteSpace: "nowrap",
fontSize: em,
lineHeight: `${L}px`,
letterSpacing,
wordSpacing,
transform: `translateX(${x}px)`,
// Under a fifth of a pixel there is nothing to smear, and a
// filter that is on for a still frame only costs it sharpness.
filter: sigma > 0.2 ? `url(#${blurId})` : undefined,
}}
>
{sigma > 0.2 ? (
<svg
aria-hidden
width={0}
height={0}
style={{ position: "absolute" }}
>
<title>motion blur</title>
<filter
id={blurId}
x="-25%"
y="-25%"
width="150%"
height="150%"
colorInterpolationFilters="sRGB"
>
<feGaussianBlur stdDeviation={`${sigma} 0`} />
</filter>
</svg>
) : null}
{words.map((word, wi) => {
const w = wordIndex++;
const wt = t - (w * wordStagger) / fps;
const p =
beat.style === "punch"
? PUNCH_EASE(
Math.max(0, Math.min(1, wt / (punchFrames / fps))),
)
: 1;
const s =
beat.style === "punch"
? punchFrom + (1 - punchFrom) * p
: 1;
return (
// A trailing space inside an inline-block is stripped — it
// sits at the end of that box's line and CSS removes it — so
// the separator goes *between* the spans, never inside one.
<Fragment key={w}>
{wi > 0 ? " " : null}
<span
style={{
display: "inline-block",
transform: `scale(${s})`,
// Not the baseline. The reference's words plainly grow
// about their own middles — at a third of their size
// they sit on a shared centre line, with their baselines
// nowhere near each other — and half the line box is
// that middle for a face whose ascent and descent
// straddle it evenly.
transformOrigin: `50% ${L / 2}px`,
}}
>
{word}
</span>
</Fragment>
);
})}
</div>
);
})}
</div>
</Item>
</AbsoluteFill>
);
}