T3 Tools · Builds and renders the video
Make a product launch video with T3 Code
T3 Code is an app for running coding agents such as Claude Code, Codex, Cursor, OpenCode, Grok Build, Pi and Muse Code from one place, on your computer or from your phone. It is not an agent itself: it drives the agents installed on your machine.
So Kuchi goes where your agent looks for MCP servers. Add it once to the agent you use and every T3 Code thread with that agent can choose a template, plan the remake and build it.
Step by step: Make a product video in T3 Code with Remotion
Connect Kuchi to T3 Code
No sign-in, no API key. The server is https://kuchi.kalarislabs.com/mcp.
Running Claude Code in T3 Code? Add Kuchi to Claude Code from your shell.
claude mcp add --transport http kuchi https://kuchi.kalarislabs.com/mcpRunning Codex? Add it to Codex CLI instead.
codex mcp add kuchi --url https://kuchi.kalarislabs.com/mcpAnother agent? Follow its guide on this site (Grok Build, Pi, Muse Code, OpenCode, Cursor and more), then start a new thread in T3 Code.
Paste the setup prompt from this page into the thread.
Why use T3 Code for your launch video
- Plan with one agent and hand the build to another in the same thread.
- Follow the render and approve commands from your phone.
- Kuchi is set up once per agent, not per app.
How it works
- 1
Choose a template
A short list of real launch videos ranked for your product, with posters and links.
kuchi_suggest_templates - 2
Study it
Every shot's exact frames, how it enters, how much moves, its colours and a sheet of real frames.
kuchi_get_breakdown - 3
Plan the remake
Your product details mapped onto the reference's frames, with a list of anything still missing.
kuchi_plan_remake - 4
Build
T3 Code writes the scenes shot by shot, using Kuchi components where they fit, and renders the video.
kuchi_get_component - 5
Check
Compare your frames with the reference at the times it returns, and fix what differs.
kuchi_check_remake
Prompts to try in T3 Code
Use Kuchi to suggest launch templates for this repo. Show me the posters.
Plan the remake of the one I pick, then hand the build to Codex.
Render the video and run kuchi_check_remake before you finish.
How T3 Code loads the MCP server
T3 Code runs agents such as Claude Code and Codex using their own configuration, so MCP servers go into the agent, not into T3 Code. For Claude Code: claude mcp add --transport http kuchi <url> (add --scope user to make it available in every repo). For Codex: codex mcp add kuchi --url <url>, which writes to ~/.codex/config.toml.
Start a new thread after adding so the agent loads the server.
Other agents T3 Code runs follow their own guides on this site.
A full run in T3 Code, step by step
Open a thread, ask for templates and pick one. The agent studies the breakdown, plans and builds the Remotion project.
T3 Code's threads make comparison cheap: open a second thread on another branch with a different template, build both from the same assets and compare the renders. Templates often feel different once your content is in them.
Finish each thread with kuchi_check_remake and the stills comparison before the final render.
What T3 Code sends to the server
The server is a remote MCP server over Streamable HTTP at https://kuchi.kalarislabs.com/mcp. Every message is a JSON-RPC 2.0 request sent as an HTTP POST to that one endpoint. It is stateless: there is no session to keep alive, no cookie and no Authorization header, so T3 Code can reconnect at any time without losing anything.
When T3 Code connects it sends initialize and receives the server's name, version, instructions and capabilities (tools, resources and argument completion), then calls tools/list. The tool list carries a one-hour cache hint, because it only changes when the server is deployed. Each tool call is a tools/call whose arguments are checked against a strict schema: unknown fields are rejected and every string has a length limit, so a malformed call fails with a clear message instead of a half-right answer.
Results come back as text, Markdown by default or JSON when the call passes response_format: "json", and JSON results also arrive as structuredContent. Media is never inlined: the reference MP4, the poster and the storyboard sheets come as resource_link entries pointing at the CDN, which T3 Code can open or fetch itself. A result is capped at 25,000 characters; a long blueprint arrives in pages of up to 40 shots, with shot_offset and shot_limit to fetch the next page.
Every tool is annotated readOnlyHint: true, destructiveHint: false, idempotentHint: true and openWorldHint: false: nothing changes on the server, the same call returns the same answer, and no tool reaches out to the wider web. The server also offers resources (kuchi://workflow, kuchi://videos/{id}, kuchi://breakdowns/{id} and kuchi://components/{name}) with autocompletion, for clients that let you attach a resource to a message.
The 13 tools, and when T3 Code calls them
| Tool | What it returns | When T3 Code uses it |
|---|---|---|
kuchi_get_workflow | The remake method, whole or one step (find, study, plan, build, check) with the rules that hold for all steps. Markdown. | Read once before the first remake, or one step at a time to keep context small. |
kuchi_suggest_templates | A short numbered list of launch videos ranked for a product description, each with poster, link, what fits, what differs, what you would need to supply and one recommendation. | First call of a job; the agent shows the posters and waits for your pick. |
kuchi_search_videos | Searches the whole library by keyword, style, category, format, aspect ratio, length, pace or theme, a page at a time. | When you ask for something specific ("vertical, fast, terminal style"). |
kuchi_get_video | One video by id, slug, site link or original X link: file, poster, storyboard, length and measured rhythm, with resource links to the MP4 and images. | When you paste a link from the site instead of choosing by number. |
kuchi_list_filters | Every valid style, category, format, aspect ratio, pace and theme with counts, plus the 14 shot kinds an agent classifies shots into. | Before a filtered search, so it never guesses a filter value. |
kuchi_get_breakdown | The frame-by-frame measurement of one video: each shot's start and end, entrance, amount of motion and colour roles, a per-second motion and loudness curve, and storyboard sheets of real frames. | Study step; the agent looks at the storyboard and writes its own shot analysis. |
kuchi_plan_remake | Takes your product details, assets and the agent's shot analysis; returns a blueprint re-timed to your length on whole frames, with your content per shot, plus missing_inputs and ready. | Called until ready=true; the blueprint becomes the shot list in code. |
kuchi_check_remake | Checks a shot list against the reference: reused brand text, assets taken from the reference, generated logos or UI, placeholders, timing gaps and drift. Returns passed and compare_frames. | Before delivery; the agent renders stills at the compare_frames times and fixes drift. |
kuchi_list_components | Lists the copy-paste Remotion components (kinetic type, captions, UI screens, cursors, logos, transitions) with dependencies and shadcn install commands. | While building, to find a ready-made component for a shot. |
kuchi_get_component | One component's full source, files, dependencies, install command and usage notes, split into parts when long. | To read a component's source before installing or adapting it. |
kuchi_send_feedback | Reports a failure or a missing capability to the maintainers. The only tool that records what the agent writes. | When a tool fails or misleads. |
search | The generic search tool some clients expect: returns up to 10 video ids, titles and URLs. | Rarely; the kuchi_ tools are richer. |
fetch | The generic fetch tool: one video by the id from search, with notes, links and metadata. | Rarely. |
How the blueprint times your video
A reference video is measured shot by shot: where each shot starts and ends, how it enters and how much of the frame moves. kuchi_plan_remake maps those shots onto your target length, between 5 and 180 seconds, at the frame rate you will render (12 to 120 fps, the reference's own by default).
If your length is at least 75% of the reference's, every shot is kept and re-timed by the same factor (mode retimed). If it is much shorter, speeding everything up would wreck the rhythm, so the plan keeps an evenly spaced subset of shots, at least three, and re-times those instead (mode condensed). Either way every shot starts on a whole frame and lasts at least one, so start_frame and end_frame are exact integers T3 Code can place directly; no rounding happens later.
Each shot also carries compare_at_s: the moment in your video that matches the reference frame shown on the storyboard, so the side-by-side check compares like with like. precision says whether every shot was classified (analysed), some were (partly_analysed) or none were (timing_only); shots without a kind keep their timing and get placeholder content until T3 Code classifies them. One shot from a blueprint:
{
"shot": 3,
"start_s": 4.2,
"end_s": 6.533,
"start_frame": 126,
"end_frame": 195,
"reference_shot": 3,
"reference_start_s": 3.9,
"reference_end_s": 6.07,
"compare_at_s": 5.1,
"enters": "transition",
"motion": "medium",
"kind": "ui_screen",
"reference_shows": "Product UI. Dashboard centered, cursor moves to a button",
"your_content": "Acme: \"Live sync\". A screenshot or recording of the user's product..."
}In Remotion the blueprint maps one to one onto a composition and a <Sequence> per shot. Saving the plan as plan.json and reading the frames from it means T3 Code never retypes a number:
// src/Root.tsx: one composition at the blueprint's fps and length
import { Composition } from 'remotion';
import plan from '../plan.json';
import { Launch } from './Launch';
export const Root = () => (
<Composition id="Launch" component={Launch}
fps={plan.blueprint.fps} durationInFrames={plan.blueprint.frames}
width={1920} height={1080} />
);
// src/Launch.tsx: one <Sequence> per blueprint shot, on its exact frames
import { AbsoluteFill, Sequence } from 'remotion';
import plan from '../plan.json';
import { shots } from './shots';
export const Launch = () => (
<AbsoluteFill>
{plan.blueprint.shots.map((s) => {
const Shot = shots[s.shot];
return (
<Sequence key={s.shot} from={s.start_frame}
durationInFrames={s.end_frame - s.start_frame + 1}>
<Shot />
</Sequence>
);
})}
</AbsoluteFill>
);Use 1080×1920 for 9:16 and 1080×1080 for 1:1. Inside a <Sequence>, useCurrentFrame() starts at 0, so each shot's entrance animation is written relative to the shot, not to the whole video.
The 14 shot kinds T3 Code classifies
While studying the storyboard, T3 Code gives every reference shot one kind. The kind decides what of yours replaces it.
| Kind | In the reference | In your video |
|---|---|---|
title_card | Words on a plain or lightly textured background | A short line in your words |
kinetic_type | Words that are the motion: typing, sliding, scaling | Your headline, animated the same way |
logo | A brand mark on its own, usually a reveal | Your logo |
ui_screen | A whole product screen, flat to the camera | A screenshot or recording of your product |
ui_closeup | One part of a screen enlarged: a button, a field, a cursor | The matching detail of your UI |
device | A screen inside a phone, laptop or browser frame | Your screen in the same frame |
chart | A graph, counter or data graphic drawing in | Your real numbers, never invented ones |
character | A mascot, illustrated figure or avatar | Your own mascot, or a placeholder |
product_render | A physical product, photographed or in 3D | Your product photo or render |
live_action | Filmed footage of people or places | Your own footage, or a placeholder |
collage | Several images, cards or screens arranged together | Several of your screens |
abstract | Shapes, gradients, particles or light | The same motion in your colours |
end_card | The closing frame: logo with a call to action | Your logo and call to action |
blank | An empty frame held as a pause | The same pause, nothing on screen |
Entrances and motion
| Value | Meaning |
|---|---|
enters: cut | Hard cut: the whole picture changes in one frame. |
enters: transition | Animated transition: several frames of heavy change join two pictures (wipe, zoom, morph or dissolve). |
enters: hold | Same scene: motion resumes after the picture held still. |
enters: blank_black | Passes through an empty black frame. |
enters: blank_white | Passes through an empty white frame. |
motion: still | Under 0.4% of the frame moves. |
motion: low | Under 3%. |
motion: medium | Under 12%. |
motion: high | 12% or more. |
What the check catches before you ship
kuchi_check_remake takes the shot list T3 Code built: each shot's start and end in seconds, the reference_shot it rebuilds, how it enters, every line of on-screen text, and where each asset came from (user, generated, stock, placeholder or reference). It returns passed, errors and warnings by shot, and compare_frames.
- Text that carries over the reference's brand, product names or slogans.
- Any asset taken from the reference video: footage, UI, characters or music.
- Generated logos or generated product UI, which should always come from you.
- Placeholders still on screen.
- Gaps or overlaps in the timeline, and shots whose length or entrance drifted from the reference shot they rebuild.
The check reads the shot list, not the file: the video never leaves your machine. T3 Code then renders a still at each compare_frames time and sets it beside the reference storyboard, which catches layout drift a quick watch misses.
Troubleshooting T3 Code
| Symptom | Fix |
|---|---|
| No tools in the thread | Add the server to the agent, then start a new thread. |
| Threads overwrite each other | Give each its own branch or folder. |
| The two agents give different shot timings | Keep the blueprint in a file and have both build from it. |
| The server was added in T3 Code | T3 Code reads the agent's config; add it there. |
| The tool list is empty or the connection times out | Check that nothing on your network (a proxy, VPN or firewall) blocks HTTPS to kuchi.kalarislabs.com, and that the URL ends in /mcp. |
| A tool says the catalog is temporarily unavailable | The library is refreshing. Retry in a minute; nothing on your side needs to change. |
Launch video templates to start from
All launch videos →Components T3 Code can install
All components →T3 Code and Kuchi: questions
Does T3 Code have its own MCP settings for Kuchi?
T3 Code uses the agents installed on your computer, and they load their own MCP servers. Add Kuchi to Claude Code, Codex or whichever agent you run and it is there in T3 Code.
Can I start the video from my phone?
Yes. With T3 Code's remote access you can start the thread, choose the template and approve commands from the mobile app while the agent runs on your computer.
Is Kuchi free to use with T3 Code?
Yes. The Kuchi MCP server is open: no account, no API key and no payment. Your own agent plan applies as usual.
Will my video copy the reference?
No. A remake borrows the reference's timing, motion and layout. Every logo, screen, line of copy and asset on screen comes from your product.







